BACK

X-30
Separation tank solution

3000 LITERS CAPACITY

The X-30 filtration system is a set of 3 x 264 gallon tanks, able to separate mud, oil and hydrocarbons due to a system of filtration and sedimentation.

Download Datasheet

HOW IT WORKS?

The X-30 filtration system is a set of 3 x 264 gallon tanks, able to separate mud, oil and hydrocarbons.

The first treatment stage consists of a sedimentation basin in which a gravimetric separation process takes place. The compounds with different specific weights to water: sand, mud, gravel, settle and accumulate at the bottom of the tank, while lighter ones (oils, fat, etc) rise to the surface. The second filtration step is to remove oil and hydrocarbons. This is done due to gravity separation and later with an absorption filter, able to intercept the oil and hydrocarbons from the water.

Finally, the recycled water is pumped into the final separator tank and is considered clean and ready to be used again to wash down other equipment.

arrow
Contaminants should be removed by authorized companies, as this type of waste may be considered dangerous, and should be disposed of as such.


Sewage treatment systems

  • Contaminated water enters
  • Dirty water will settle
  • Removal of oils and hydrocarbons through the lamellar filter
  • Final Filter
  • The booster pump delivers the new clear water to the HP cleaner
  • Optional: Biological Treatment

ACTIVE PURIFICATION WITH BIOLOGICAL TREATMENT

These tanks can also be equipped with active purification systems. We use a heavy-duty filtration system where the wastewater is subjected to an intensive biological treatment which uses specific harmless bacteria to break organic substances dissolved in the water. The waste water is subjected to an intensive biological treatment in which, through the development of specific bacterial strains, kills dissolved organic matter and detergents. Microbial powders within the oxidation tank, a pre-set amount of micro-organisms is dosed through a dozer. The dosing pump is pre-installed and the setting is done in for the customer’s need.

The transportable purifiers X-Splash Heavy Duty use a biological purification system through effective mixtures of microbial powders, creating purified wastewater suitable for reuse without any special waste.

The Filtration Tanks are dispatched already assembled into a stainless-steel frame for ease of handling and installation. The electrical components necessary for this Heavy Filtration Tank (control panel – blower and air compressor)

Technical Specifications X-30
Dimensions 145″l x 40″w x 85″h
Dry Weight 1,411 lbs
Suction pump 0.59 kW – 48 gpm
Booster pump 0.37 kW – 1.3 to 11 gpm